Intex inflatable sofa bed

Advice on handling, inflation, use and storage to extend the use of the product. Here are some recommendations for consumers

– Do not walk, stand, jump or use this product as a trampoline.

– Keep pets away from the product. Pets can pierce the surface of this product.

– Make sure the area is flat, level, clean and free of sharp objects. To avoid puncturing or damaging the product, never drag it on the floor. Lift the product when moving or changing location.

– Unfold the product and locate the inflation valve.

– To inflate separate the valve cap from the valve housing and firmly press the valve housing into the exhaust port. If the valve housing is already inserted into the exhaust port, pull the valve cap to open it.

– Adults should inflate each chamber slowly using a foot pump or manual air pump. Insert the hose or pump tip into the inflation valve and inflate. Make sure the product is firm to the touch but not hard. CAUTION To avoid bursting, do not use a high pressure pump such as an air compressor. Put the cap back in place after inflation.

For deflation and storage

– To deflate remove the valve cap, then pull the “inflation valve housing” to release the air. Put the “inflation valve housing” and the cap back in place after deflating.

– Make sure the product is clean and dry.

– Lay the product flat, with the sleeping surface facing upwards. Fold the product without tightening and avoid curves, angles and sharp folds that could damage it.

– Place the product in its original packaging and store it in a dry and cool place.